Lexmark X658DFE Service Manual - Page 157

7462 Step Check Yes No 7 Place an undamaged document in the ADF, and perform a Replace the ADF Problem solved. ADF test. controller card Does the error remain? assembly. Go to "ADF controller card removal (models X651, X652, X654, X656, and X658)" on page 4-65. Go to step 8. 8 Perform a print test using the ADF. Does the problem remain? Contact next highest level of tech support. Problem solved. Sensor (ADF sheet through) lingering jam service check Use this procedure for the following jams: • 290.03 Step Check Yes 1 Check the media size setup and tray guides for the ADF. Go to step 2. Does the media size, in use, match the size set for the ADF 2 Check the original document condition. Go to step 3. Is the original document free of paper clips and staples as well as damage such as creases, tears, holes or excessive wear? 3 Check the media path for contaminates. Go to step 4. Is the media path free of excess media dust and foreign objects such as paper clips and staples? 4 Check the sensor (ADF sheet through) for proper operation. Go to step 6. 1. Enter the Diagnostics Menu. 2. Touch SCANNER TESTS. 3. Touch Sensor Tests. 4. Observe the line "sensor (ADF sheet through)" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked? No Replace the media, or change the media size setup. Remove damaged original document and replace with a new undamaged original document. Perform a ADF test. If the problem remains, go to step 2. Remove all contaminates from the media path. Go to step 5. Diagnostic information 2-123