Lexmark X658DFE Service Manual - Page 76

7462 Error code or message 242.52 242.33 242.34 242.36 242.37 242.39 242.40 Error contents Tray 2 pick motor overrun failure Source = Tray 2 Tray 2 not ready Source = Tray 2 Empty tray pick attempted Source = Tray 2 Sensor (pass through) static jam Source = Tray 2 Sensor (pass through) late jam Source = Tray 2 Media tray pulled jam Sensor (pass through) lingering jam Source = Tray 2 Description/Action The Pick motor encoder continues to detect pulses after the motor was turned off. Tray was not properly pushed into the machine. The pick arm attempted to pick with no media in the tray. Media remains on the sensor (input) during the warm up sequence. The media is late reaching the sensor (pass through) within the specified time. A media tray above the source tray was pulled during the printing process. Media reached the sensor (pass through) within the specified time but did not clear it within the specified time. Possible repair actions 1. Check all connections on the pick arm assembly. 2. Check all connections on the system card assembly. 3. Replace the pick arm assembly if problem remains. Go to "Pick arm assembly removal (X651, X652, X654, X656, and X658)" on page 4-29. 1. Check the size sensing fingers on the media tray for damage 2. Replace the media tray assembly if problem remains. 3. Check the switch (media size) for proper connection. 4. Replace the switch (media size) if problem remains. Go to "Switch (media size) assembly removal (X651, X652, X654, X656, and X658)" on page 4-46. 1. Check the media out actuator for damage. 2. Replace the media out actuator if problem remains. Go to "Media out actuator removal (X651, X652, X654, X656, and X658)" on page 4-23. Go to sensor (pass through) static jam service check. See "Sensor (pass through) static jam service check" on page 2-154. Go to sensor (pass through) late jam service check. See "Sensor (pass through) late jam service check" on page 2-152. 1. Remove all media present in media path. 2. Close all media trays. Go to sensor (pass through) lingering jam service check. See "Sensor (pass through) lingering jam service check." on page 2-153. 2-42 Service Manual