Lexmark X658DFE Service Manual - Page 174

7462 Step Check 10 Perform a print test. Does the problem remain? Sensor (input) early jam service check Use this procedure for the following jams: • 200.04 • 200.06 • 200.08 Yes Contact next highest level of tech support. No Problem solved. • 200.14 • 200.33 Step Check 1 Check media origination. Did the media originate from the MPF? 2 Check the MPF pick roll assembly. Is the above component free of excess wear and contamination? Yes Go to step 2. Go to step 3. 3 Perform a MPF print test and check the MPF pick solenoid Go to step 4. for proper operation. Does the above component operate properly? 4 Check the MPF lift plate assembly for damage. Is the above component free from damage? Go to step 5. 5 Check all the media trays for proper media installation. Go to step 6. Is the media properly installed in all the media trays? 6 Check all of the media trays and the media path for partially fed media. Are the media trays and the media path free from any partially fed pieces of media? Go to step 7. No Go to step 5. Clean or replace the MPF pick roll assembly. Go to Go to Go to "MPF pick roll assembly removal (X651, X652, X654, X656, and X658)" on page 4-26... Replace the MPF pick solenoid. Go to "MPF pick solenoid assembly removal (X651, X652, X654, X656, and X658)" on page 4-26. Replace the MPF lift plate assembly. Go to "MPF lift plate assembly removal (X651, X652, X654, X656, and X658)" on page 4-25. Remove and properly re-install the media. Remove any prestaged or jammed media. 2-140 Service Manual