Lexmark X658DFE Service Manual - Page 175

7462 Step Check Yes No 7 Check the sensor (input) for proper operation. Go to step 9. Go to step 8. 1. Enter the diagnostic mode 2. Select Base sensor test 3. Observe the line item "input" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 8 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the Sensor (input). Go to "Sensor (input) removal (X651, X652, X654, X656, and X658)" on page 4-43. Replace the connection. 9 Perform a print test. Does the problem remain? Contact next highest level of tech support. Problem solved. Sensor (input) static jam service check Use this procedure for the following jams: • 200.13 Step Check Yes No 1 Check the media path for partially fed or jammed media. Go to step 2. Is the media path free from partially fed or jammed media? Remove any prestaged or jammed media. 2 Check the sensor (input) for proper operation. Go to step 4. Go to step 3. 1. Enter the diagnostic mode 2. Select Base sensor test 3. Observe the line item "input" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 3 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the Sensor (input). Go to "Sensor (input) removal (X651, X652, X654, X656, and X658)" on page 4-43. Replace the connection. 4 Perform a print test. Does the problem remain? Contact next highest level of tech support. Problem solved. Diagnostic information 2-141