Lexmark X658DFE Service Manual - Page 257

7462 Reports Menu Settings Page To print the Menu Settings Page, touch to select Menu Settings Page from Reports. The message Printing Menu Settings Page is displayed. The following settings are printed: Maintenance Counter Value Reports PPDS Emulation Min Copy Memory ADF Edge Erase Disable Scanner Disk Encryption Required Standby Key Repeat Rate USB Scan to Local SIZE SENSING Factory Defaults NumPad Job Assist FB Edge Erase Paper Prompts Wipe Disk LES Applications Wiper Message Print Quality Pages Panel Menu Energy Conserve Fax Storage Location Scanner Manual Registration Envelope Prompts Font Sharpening Key Repeat Initial Delay Clear Custom Status Touch Back to return to the Configuration Menu. Event Log The event log provides a history of printer errors. The event log can only be printed in CONFIG MENU. Additional options are available in DIAGNOSTICS. See "EVENT LOG" on page 3-25. To print the event log: 1. Touch to select Event Log from Configuration Menu. 2. Touch to print the log. Printing EVENT LOG.. displays on the touchscreen. 3. Touch Back to return to EVENT LOG. Note: An event log printed from the CONFIG MENU will not contain debug information or secondary codes for 900 service errors. However, the event log printed from DIAGNOSTICS mode does include this information. SIZE SENSING This setting controls whether the printer automatically registers the size of paper installed in an input source with size sensing. Paper source Tray 1 (integrated) Multipurpose feeder 250-sheet drawer 550-sheet drawer 2000-sheet drawer 250-sheet duplex 550-sheet duplex Envelope feeder Size sensing ✓ ✓ ✓ ✓ Diagnostic aids 3-31