Lexmark X658DFE Service Manual - Page 194

7462 Step Check 4 Check the above sensor for proper connection. Is the above sensor connected properly? 5 Perform a print test using the output option. Does the error continue? Sensor (mailbox empty) static jam service check Yes No Replace the sensor (mailbox empty). Go to "4-bin mailbox assembly sensor (mailbox empty) removal" on page 4-200. Replace the output option. Replace the connection. Problem solved. Step Check Yes No 1 Check the media path for partially fed or jammed media. Go to step 2. Is the media path free from partially fed or jammed media? Remove any prestaged or jammed media. 2 Check the sensor (mailbox empty) for proper operation. Go to step 4. Go to step 3. 1. Enter the diagnostic mode 2. Select Output bin tests 3. Select Sensor test 4. Select Output bin x 5. Observe the line item "passthru" Does the display on the operator panel, change every time the sensing area of the above sensor is interrupted or blocked. 3 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the sensor (mailbox empty). Replace the connection. Go to "4-bin mailbox assembly sensor (mailbox empty) removal" on page 4-200. 4 Perform a print test using the output option. Does the error continue? Replace the output Problem solved. option. Sensor (toner empty) service check Step Check 1 Check the sensor (toner empty) for proper installation. Is the above component properly installed? Yes go to step 2. No Reinstall the sensor (toner empty) 2-160 Service Manual