Lexmark X658DFE Service Manual - Page 48

7462 Error code or message 200.13 Error contents Sensor (input) static jam 200.14 Sensor (input) early jam 200.15 Laser power did not settle 200.16 Main drive motor assembly load error 200.17 200.18 200.19 Sensor (input) lingering jam Source = Tray 1 Tray level= Not Low Sensor (input) lingering jam Source = Tray 1 Tray level = Low Sensor (input) lingering jam Source = Tray 1 Tray level = Empty Description/Action Possible repair actions Media remains on the sensor (input) during the warm up sequence. The media reached the sensor (input) sooner than the specified time. Laser circuit failure on printhead or system card assembly. The main drive motor assembly has failed or caused high mechanical load due to paper jam or bind. The media reached the sensor (input) but did not clear it within the specified time. The media reached the sensor (input) but did not clear it within the specified time. The media reached the sensor (input) but did not clear it within the specified time. Go to sensor (input) static jam service check. See "Sensor (input) static jam service check" on page 2-141. Go to sensor (input) early jam service check. See "Sensor (input) early jam service check" on page 2-140. 1. Remove all media present in media path. 2. Check all connections on the printhead. 3. Check all connections on the system card assembly. Replace the printhead if problem remains. Go to "Printhead assembly removal (X654, X656, and X658)" on page 4-34. 4. Replace the system card if problem remains. Go to "System card assembly removal (X651, X652, X654, X656, and X658)" on page 4-51. 1. Remove all media present in media path. 2. Check all connections on the main drive motor assembly. 3. Check all connections on the system card assembly. 4. Replace the main drive motor assembly if problem remains. Go to "Main drive motor assembly removal (X651, X652, X654, X656, and X658)" on page 4-20. Go to sensor (input) lingering jam service check. See "Sensor (input) lingering jam service check." on page 2-138. Go to sensor (input) lingering jam service check. See "Sensor (input) lingering jam service check." on page 2-138. Go to sensor (input) lingering jam service check. See "Sensor (input) lingering jam service check." on page 2-138. 2-14 Service Manual