Lexmark X658DFE Service Manual - Page 53

7462 Error code or message 201.55 201.56 201.57 201.75 201.76 201.77 201.79 Error contents Operator panel door assembly interlock switch open failure Type 1 fuser Fuser page count has exceeded life Sensor (narrow media) late jam Type 1 fuser Fuser page count has exceeded life. Sensor (fuser output) late jam Type 1 fuser Fuser page count has exceeded life Sensor (fuser output) late jam Type 2 fuser Fuser page count has exceeded life. Main drive motor assembly load error. Type 2 fuser Fuser page count has exceeded life. Sensor (fuser output) late jam Type 2 fuser Fuser page count has exceeded life. Sensor (narrow media) late jam Type 2 fuser Fuser page count has exceeded life Description/Action The printer detected that the switch (operator panel door interlock) did not cycle prior to printer restart. The media is late reaching the sensor (narrow media) within the specified time. The media is late reaching the sensor (fuser output) within the specified time. The media is late reaching the sensor (fuser output) within the specified time. The main drive motor assembly has failed or caused high mechanical load due to paper jam or bind. The media is late reaching the sensor (fuser output) within the specified time. The media is late reaching the sensor (narrow media) within the specified time. Possible repair actions 1. Remove all media present in media path. 2. Ensure that the operator panel door assembly is fully open then fully closed. 3. Check operator panel door assembly for damage. 4. Check interlock switch (in left operator panel hinge) for damage. 5. Check all connections on the system card assembly. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-145. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-142. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-142. 1. Remove all media present in media path. 2. Check all connections on the main drive motor assembly. 3. Check all connections on the system card assembly. 4. Replace the main drive motor assembly if problem remains. Go to "Main drive motor assembly removal (X651, X652, X654, X656, and X658)" on page 4-20. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-142. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-145. Diagnostic information 2-19