Lexmark X658DFE Service Manual - Page 187

7462 Step Check Yes No 7 Check the above sensor for proper connection. Is the above sensor connected properly? Replace the appropriate Sensor (pass through). Replace the connection. Go to "Sensor (pass through) with cable removal" on page 4-190. 8 Perform a print test and check the pick arm assembly for the appropriate media tray. Is the media properly picked and advanced out of the appropriate media tray? Go to step 8. Replace the appropriate pick arm assembly. Go to "Pick arm assembly removal (X651, X652, X654, X656, and X658)" on page 4-29. 9 Perform a print test and check the main motor assembly. Go to step 9. Is the media properly transported through the pass through areas of the media trays? Replace the main drive motor assembly. Go to "Main drive motor assembly removal (X651, X652, X654, X656, and X658)" on page 4-20. 10 Perform a print test using the appropriate input tray. Does the error continue? Replace the input Problem solved. option. Sensor (pass through) lingering jam service check. Use this procedure for the following jams: • 242.08 • 244.40 • 242.40 • 245.08 • 243.08 • 245.40 • 243.40 244.08 Step Check Yes 1 Check the media size setup and tray guides for all media trays. Go to step 2. Does the media size, in use, match the size set for all media trays? 2 Check the media tray pass through areas for obstructions. Go to step 3. Are the pass through areas in all the media trays free from obstructions? No Replace the media, or change the media size setup. Remove obstructions. Diagnostic information 2-153