Onkyo TX NR807 Owner Manual - Page 118
Setting the Powered Zone 2/3, Notes, Not Act
UPC - 751398008788
View all Onkyo TX NR807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Multi Zone-Continued Setting the Powered Zone 2/3 4 If you've connected your Zone 2/3 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" on page 116 or "Connecting Your Zone 3 Speakers Directly to the AV receiver" on page 117, you must set the "Powered Zone2" or "Powered Zone3" setting to "Act" (Acti- vated). 1 Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 5 Use the Up and Down [R]/[X] buttons to select "Powered Zone2" or "Powered Zone3", and use the Left and Right [F]/[S] buttons to select: Not Act: ZONE 2/3 L/R speaker terminals not activated (Powered Zone 2/3 disabled). Act: ZONE 2/3 L/R speaker terminals activated (Powered Zone 2/3 enabled). Press the [SETUP] button. The setup menu closes. 2 Use the Up and Down [R]/[X] buttons to select "2. Speaker Notes: Setup", and then press [ENTER]. • Powered Zone2/3 cannot be used if "Speaker Type The "Speaker Setup" menu appears. (Front)" is set to "Bi-Amp" (see page 51). • "Powered Zone3" cannot be used if "Powered Zone2" 2. Speaker Setup 1. Speaker Settings 2. Speaker Configuration 3. Speaker Distance 4. Level Calibration 5. Equalizer Settings 6. THX Audio Setup is set to "Not Act". • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 3 Use the Up and Down [R]/[X] buttons to select "1. Speaker Settings", and then press [ENTER]. The "Speaker Settings" menu appears. 118