Onkyo TX NR807 Owner Manual - Page 27
Connecting Both Audio & Video, Which Connections Should I Use?, Video Connection Formats TX-NR807 - - thx
UPC - 751398008788
View all Onkyo TX NR807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting the AV receiver-Continued Connecting Both Audio & Video By connecting both the audio and video outputs of your DVD/BD player and other AV components to the AV receiver, you can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver. : Signal Flow Video Audio Video Audio TV, projector, etc. DVD/BD player, etc. Speakers (see page 20 for connection information) Which Connections Should I Use? The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your other components. Use the following sections as a guide. Video Connection Formats (TX-NR807) Video equipment can be connected to the AV receiver by using any one of the following video connection formats: composite video, S-Video, component video, or HDMI, the latter offering the best picture quality. The AV receiver can upconvert and downconvert between video formats, depending on the "Monitor Out" setting, which generally determines whether video signals are upconverted for the component video output or the HDMI output. For optimal video performance, THX recommends that video signals pass through the system without upconversion (e.g., component video input through to component video output). To by-pass video upconversion in the receiver, simultaneously press the [VCR/DVR] and [RETURN] buttons on the AV receiver. While continuing to hold down the [VCR/DVR] button, press the [RETURN] button to toggle until "Skip" appears on the display. Release both buttons. To use the video upconversion in the receiver, repeat the above process until "Use" appears on the display and release the buttons. ■ "Monitor Out" Setting Set to "HDMI" DVD/BD player, etc. Video Signal Flow Chart With the "Monitor Out" setting set to "HDMI" (see page 43), video input signals flow through the AV receiver as shown, with composite video, S-Video, and component video sources all being upconverted for the HDMI output. Use this setting if you connect the AV receiver's HDMI OUT to your TV. The composite video, S-Video, and component video outputs pass through their respective input signals as they are. AV receiver Composite S-Video Component IN HDMI Composite MONITOR OUT S-Video Component HDMI Note: If not connected to HDMI OUT, the "Monitor Out" setting will be automatically switched to "Analog" (see page 28). In this case, the setting of the output resolution will be that for HDMI output (see page 46). Moreover, it will be switched to "1080i" when "1080p" is selected, and to "Through" when "Auto" is selected. TV, projector, etc. 27