Pfaff creative 2144 Owner's Manual - Page 135
Stitchwidth
View all Pfaff creative 2144 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
____ Function buttons I these buttons are located on the head of the machine Thread cutter If you press this button, you automatically cut off the needle thread and bobbin thread. Stitch restart If you press this button, the machine automatically returns to the start of a stitch or program that has already been started. Sew slow If you press this button, the machine's max. sewing speed is halved. Needle up I down If you press this button, the needle automatically comes to rest in the lower position when you stop sewing. You can simultaneously determine whether and how far the presser foot is raised when you take your foot off the foot - control. A window is opened for this purpose. You can choose between "0" , "low" = 3mm, "medium" 6 mm and "high" = 9mm. When you press the foot control again, the presser foot is automatically lowered again. This allows you to turn the material beneath the machine without the fabric slipping. The basic setting is "0", i.e. the presser foot is not automatically raised. Reverse sewing button This button has several functions 1. If you press this button while sewing, the machine sews in reverse for as long as you keep the button pressed. 2. If you press this button before starting to sew, the machine sews in reverse until you press the button again. When the function is activated, a reverse sewing arrow appears on the multi-color touch screen. 3. If you have activated the tie-off program, tie-off at the end is initiated via this button. 4. In the "Patchwork", "Tapering", "Four sewing directions" and "Darning" programs, you determine the length of the seams with this button. 5. If you are programming the length of a buttonhole, you determine the length of the buttonhole seam with this button. Bobbin thread monitor This function is for monitoring the bobbin thread. The bobbin symbol flashes automatically when the bobbin thread is nearing its end. jfunction is only activated when the hook cover is closed, Stitch Settings I these are the basic settings for stitches F" " t "Stitch" width -. You can increase or reduce the width of the stitch with the +1- icons. For all straight stitches: You can move the needle in steps with the +1- icons. + The needle moves to the right in nine steps of 0.5 mm each - The needle moves to the left in nine steps of 0 5 mm each Stitch length You can increase or reduce the length of the stitch with the +/- icons. Stitch elongation You can increase or reduce the stitch density of the stitch with the +/- icons. Thread tension: Ynu can change the pre-set needle thread tension with the +/- icons. 3 I