Pfaff creative 2144 Owner's Manual - Page 143
selection, Positioning, design, Orbiting, tuning, Design, processing, Rotate, Repositioning, alerts
View all Pfaff creative 2144 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Hoop selection With this function, you can select an embroidery hoop that is not yet fitted to the machine. A window for selecting the hoop size appears for this purpose. After the hoop has been selected, it is represented on the screen Positioning a design Use this function to get the exact position of your design by orbiting it within the embroidery hoop. With the aid of a cross-hair cursor you can accurately combine one or several designs into a large embroidery combination by changing the position of the fabric in the hoop. - Orbiting Touch these icons to move the embroidery hoop to the upper left/upper right or lower left/lower right corner of the design. Use this function to select that the hair-cross cursor ( and the embroidery hoop) permanenly will be moved to the position in the design where it can be joined to an already embroidered design. Fine tuning Use the four arrows to move the embroidery hoop in mm steps in the different directions. V Design processing This opens a window for further processing the design you have marked. You can alter the size, move and rotate the design within the hoop. Move the design Position your selected design in the embroidery hoop using your finger tip or stylus. This function must be deselected again. You can fine tune the designs position within the hoop with the eight direction arrows. • The numbers in top of the pop-up windows tell you how many mm the design has been moved from the center of the hoop. Rotate the design Rotate your selected design directly on the mult-color touch screen using your finger tip or stylus. This function must be deselected again. I Use this icon to rotate your design in steps of 1 in the direction of the arrow. '-'-p Repositioning If you rotate a design and it then protrudes beyond the hoop, a red line appears in place of the hoop. This line alerts you to the fact that the design cannot be embroidered in this position. The design is automatically placed into the embroidering field with this function. Undo This function cancels the command described above and places the design back outside the hoop. allowing you to continue turning it. If no red line is visible, a design is within the hoop and can be embroidered. . Size adjustment You can adjust the size of he design with the +1- icons. The designs are always adjusted proportionally. Basting function Touch this icon to activate the basting function, for stitching around the design with a 6 mm straight stitch. + Thread tension You can adjust the thread tension (tighter or slacker) with the +/- cons, -J