Pioneer PDP-505HD Owner's Manual - Page 56
Problems commonly mistaken, as breakdown - sale
View all Pioneer PDP-505HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ENGLISH ADDITIONAL INFORMATION ○ ○ Problems commonly mistaken as breakdown ○ ○ ○ Problem ÷ The screen is displayed in a small size. ÷ Letter breakup on screen. ÷ A sharp sound is sometimes heard from the cabinet. ÷ Bright portions of image appear to be loosing intensity. ÷ Speckles or noise appears on screen. ÷ Stripes appear on the screen. ÷ Operation is not possible. ÷ Sound is heard from inside the unit. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Possible Solution ÷ Check the input signal compatibility chart (pages 55 and 56). ÷ Is an appropriate screen size selected? (pages 22 and 25) ÷ Adjust using SCREEN mode on the menu screen (page 38). If there is still no improvement, this unit may be limiting the displayable range. Check the personal computer input signal compatibility chart (pages 55 and 56). ÷ Expansion/contraction caused by surrounding temperature change may result in sound being heard from the cabinet. This is not a malfunction. ÷ When the video input signal's level is too high, the bright portions may appear to be losing their intensity. Increase the adjustment level of the contrast and check the picture (page 31). ÷ May be caused by radio wave interference from appliances with motors such as hair dryers, electric vacuum cleaners, electric power drills, ignition systems of cars, motorcycles etc., switch devices such as thermostats etc., neon signs or electrical discharge from power lines etc.. ÷ May be caused by radio wave mingling from TV station, FM station, amateur radios, public radios (simplified radios) etc., or a nearby personal computer, TV, or video/audio component. ÷ Strong magnets in the vicinity may cause picture distortion and similar problems. ÷ External influences such as lightning strike, static electricity etc., may cause improper operation. In this case, operate the unit after first turning the main power ON/OFF, or unplugging the power cord and re-plugging it in after 1 to 2 minutes. ÷ Sound of fan revolving. This is not a malfunction. ○ ○ ○ Although this unit incorporates high precision technology in its design, please understand that there may be extremely slight pixel breakup, or light emission fault. Note In order to protect this unit's panels and circuitry, the revolving speed of the interval fan will be automatically increased in order to cool the inside of the unit when the surrounding temperature exceeds 104 °F (40 °C). (The sound of the fan will become louder at this time). Please operate this unit in a location with a surrounding temperature under 104 °F (40 °C). ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Additional cautions ÷ If the power is automatically turned off during operation of this unit, the following reasons may be the cause. 1 Is the POWER SAVE mode set to "MODE1" or "MODE2"? (page 26) 2 The surrounding temperature has risen above 104 °F (40 °C). Please operate this unit in a location with a surrounding temperature under 104 °F (40 °C). 3 The vents are blocked or the internal temperature has risen abnormally due to abnormal heat generation of internal parts etc.. If the power is automatically turned off for a reason other than the above reasons, there could be a malfunction. In this case, unplug the power cord from the power outlet and request repair from your nearest sales outlet. ÷ The plasma display panel of this unit is very bright and viewing it a close distance will cause eye strain. We recommend that you view the screen from a suitable distance (9.8 to 19.7 feet (3 to 6m)). ADDITIONAL INFORMATION ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 52 En