Ricoh CL3000e Manual - Page 172

Options B Press the {U} or {T} key to select characters, and then press the {Enter #} key. 1 SSID: [ 1] A The pointer (k) moves to the next character position. SSID: Ak [ 1] C Continue entering the key. Note ❒ The characters that can be used are ASCII 0x20-0x7e (32 bytes). ❒ If you press the {Escape} key, the pointer (k) moves to the previous character position. D After entering the key, press the {Enter #} key twice. SSID: [32] AAAAAAAAAAAAAAAA The screen returns to step K. L Press the {U} or {T}key to dis- play "WEP Setting". IEEE 802.11b: WEP Setting A Press the {Enter #} key. WEP Setting: *Not Active 30 B Press the {U} or {T} key to display "Active", and then press the {Enter #} key. WEP Setting: Active The following message appears on the panel display. Change WEP Key: Yes Note ❒ When setting the WEP Setting to "Active", you will need to enter the WEP key. If you have not entered the key, be sure to enter it. ❒ If you have entered the WEP key and change the setting, press the {U} or {T} key to display "No", and then press the {Enter #} key. C Press the {Enter #} key. WEP Key: k [ 0] Note ❒ The value in brackets at the upper right is the number of characters entered. D Press the {U} or {T} key to select characters, and then press the {Enter #} key. WEP Key: 0 [ 1] The pointer (k) moves to the next character position. WEP Key: 0k [ 1]