Ricoh CL3000e Manual - Page 412

Operating Instructions Administrator Reference 226 Message Description and Solutions sap enable, saptype=, sapname= The SAP function has started. The SAP (SAP type and SAP name) packet is issued to advertise the service on the SAP table on the NetWare server. Set context to A has been set. shutdown signal received. network service rebooting... Rebooting the network service. smbd start. (NetBEUI) An smbd (SMB (Server Message Block) service) has started. Snmp over ip is ready. Communication over TCP/IP with SNMP is available. Snmp over IP over 1394 is ready. Communication over IP over 1394 with SNMP is available. Snmp over ipx is ready. Communication over IPX with SNMP is available. snmpd start. SNMP service has started. started. Direct print service has started. The print server received error during at- Cannot log in to the file server. The print server is not regtempt to log in to the network.Access to the network was istered or the password is specified. Register the print denied.Verify that the print server name and password are server without specifying a password. correct. win2kspd protocol-DOWN (APPEXIT). NVRAM setting ioctl (SPIO CAPPEXIT) of device SBP2TSP was set by protocol-DOWN. SCSI print is not receiving data. win2kspd protocol-UP (APPENTRY). NVRAM setting ioctl (SPIO CAPPENTRY) of device SBP2TSP was set by protocol-UP. SCSI print is not receiving data. win2kspd started. SCSI print (SBP-2) service has started.