Ricoh CL3000e Manual - Page 47

Replacing Consumables and Maintenance Kit Fusing Unit Type 125 R CAUTION: • The inside of the machine be- comes very hot. Do not touch the parts with a "v" label (means hot surface). Touching a part with a "v" label (means hot surface) could result in a burn. ❖ Fusing Unit 3 • The fusing unit becomes very hot. When installing the new fus- ing unit, turn off the printer and wait about 30 minutes. After that, ZHBH200E install the new fusing unit. Not waiting for the unit to cool down ❖ Transfer Roller can result in a burn. • Do not pull out the fusing unit forcefully. It may cause the unit to fall and result in an injury. • When touching the fusing unit, do not touch any areas other than the handle as it may cause a burn. Replace the fusing unit when the following message appears on the panel display. Replace Fusing Unit Soon or Replace Fusing Unit Check the contents of the box for the following items: ZHBH590E Important ❒ Be sure to make the setting from the control panel after replacing the fusing unit. Without it, the procedure is incomplete. A Turn off the power. Important ❒ To prevent a burn, after the power is turned off, be sure to wait about 30 minutes until the fusing unit cools down before touching the fusing unit. 38