Ricoh CL3000e Manual - Page 382

Operating Instructions Administrator Reference 196 Direct Printing Port The direct printing port allows printing directly from a computer, connected to the network, to the printer. Use the diprint command to change the direct printing port settings. ❖ View settings The following command displays the current direct printing port settings. msh> diprint Example output: port 9100 timeout=300(sec) bidirect off • The "Port" specifies the port number of the direct printing port. • The "bidirect" setting indicates whether the direct printing port is bidirectional. ❖ Setting timeout You can specify the timeout interval to use when receiving data from the network. msh> diprint [0~65535] Note ❒ The factory default is 300 seconds. ❒ If 0 is set, timeout is disabled. ❖ Bidirectional configuration for the direct printing port Use this setting to configure whether the direct printing port is bidirectional. The factory default is "off". msh> diprint bidirect {on|off}