Ricoh CL3000e Manual - Page 405

Operating Instructions Administrator Reference 219 Message List This is a list of messages written in the printer's system log. The system log can be viewed using the syslog command. System Log Information You can use the following methods to view the system log. • telnet : Use the syslog command. See p.184 "Commands List" . Message Description and Solutions Access to NetWare server denied. Ei- (In print server mode) Cannot log in to the file server. ther there is no account for this print server on the Net- Make sure that the print server is registered on the file Ware server or the password was incorrect. server. If a password is specified for the print server, de- lete it. add_sess: community already defined. The same community name already exists. Use another community name. add_sess: sessionalready defined. A requested community name is not defined. add_sess: bad trap addr:, community: The IP address (0.0.0.0.) is unavailable when the community access type is TRAP. Specify the host IP address for the TRAP destination. add_sess_ipx: bad trap addr: , community: The IPX address (00:00:00:00:00:00) is unavailable when the community access type is TRAP. Specify the host IPX address for the TRAP destination. add_sess_ipx: community already The same community name already exists. Use another defined. community name.