Ricoh CL3000e Manual - Page 389

Operating Instructions Administrator Reference 203 Changing the Host Name Use the hostname command to change the printer name. msh> hostname [interface_name ] printer_name interface name ether wlan *2 ip1394 *3 Interface to be configured Ethernet interface *1 IEEE 802.11b interface IEEE 1394 interface *1 If you did not enter the interface name, it will be automatically set to the Ethernet interface. *2 If you install the optional 802.11b Interface Unit, you can set the command. *3 If you install the optional 1394 Interface Unit, you can set the command. Note ❒ Enter the printer name using up to 13 characters. ❒ You cannot use a printer name starting with RNP or rnp. ❒ The Ethernet interface and IEEE 802.11b interface will have the same printer name. SNTP The printer clock can be synchronized with a NTP server clock using the Simple Network Time Protocol (SNTP). To change the SNTP settings, use the sntp command. Limitation ❒ SNTP supports the NTP servers running xnptd V3 and V4.