Ricoh CL3000e Manual - Page 407

Operating Instructions Administrator Reference 221 Message Could not attach to FileServer Could not attach to PServer Current Interface Speed:xxxMbps Current IP address Current IPX address DHCP lease time expired. DHCP server not found. dhcpcd start. Duplicate IP=(from ). Established SPX Connection with PServer, (RPSocket=, connID= ) exiting Description and Solutions (In remote printer mode) Cannot attach to the file server. For some reason, the file server refuses the connection. Check the file server configuration. (In remote printer mode) Cannot attach to the print server. For some reason, the print server refuses the connection. Check the print server configuration. The speed of the network (10 Mbps or 100 Mbps). The IP address was received from the DHCP server. The current IPX address. DHCP lease time has expired. The printer tries to discover the DHCP server again. The IP address used up to now becomes invalid. The DHCP server cannot be found. Make sure the DHCP server is running on the network. A dhcpcd (DHCP client service) has started. The same IP address is used. An IP address must be unique. Check the address of the device indicated in . (In remote printer mode) A connection with the print server has been established. lpd service has ended and the system is exiting the process.