Ricoh CL3000e Manual - Page 62

5. Troubleshooting Error & Status Messages on the Control Panel ❖ Status Messages Messages/Second messages Calibrating... Energy Save Mode Hex Dump Mode Offline Please Wait Processing... Ready Resetting Job... Waiting... Warming Up... Status The printer is calibrating the color. Wait until "Ready" appears on the panel display. The printer is in Energy Saver (low-power) mode. No action is required. The printer receives data in hexadecimal numbers in Hex Dump mode. Turn off the printer after printing, and then turn it back on. The printer is offline. Make the printer online by pressing the {On Line} key to start printing. The printer is initializing the development unit or HDD. Wait for a while. This message may appear when printing with small size paper continuously. Wait for a while. The printer is processing the print job. Wait for a while. The default ready message. The printer is ready for use. No action is required. The printer is resetting the print job. Wait until "Ready" appears on the panel display. The printer is waiting for the next data to print. Wait for a while. The printer is warming up and not ready. Wait until "Ready" appears on the panel display. ❖ Alert Messages Messages/Second messages Add Toner: XXX Description The printer is out of the indicated toner(s). XXX: Yellow/Magenta/Cyan/Black Solution Replace with a new toner cartridge of the indicated color(s). Even when yellow, magenta or cyan toner runs out, you can print in black and white using the black toner. See p.29 "Replacing Consumables and Maintenance Kit". 53