Ricoh CL3000e Manual - Page 78

Removing Misfed Paper Removing Misfed Paper When a paper misfeed occurs, an error message appears on the panel display. Remove the misfed paper from the location indicated. Important Note ❒ Close the Bypass Tray if it is extended. If the Bypass Tray is extended, the front cover does not open. ❒ Toner dust may be on the misfed paper after removal. Be careful not to get it on your hands or clothes. B If you see the misfed paper, slow- ly pull it out. ❒ Toner dust may be on the paper printed after removing misfed paper. Make a few prints until smears do not appear any more. ❒ Forcefully removing misfed paper may cause paper to tear and leave scraps of paper in the printer. This might cause a misfeed and damage the printer. 5 ZHBH120E When "Remove Misfeed A:Internal Path" Appears R CAUTION: • The inside of the machine be- comes very hot. Do not touch the parts with a "v" label (means hot surface). Touching a part with a "v" label (means hot surface) could result in a burn. If you cannot remove paper easily, do not forcefully pull it, but go to next step. C Pull part "A" in the direction of the arrow, and then open the cover. A Open the front cover by pushing the front cover release button. A ZHBH070E ZHBP281E 69