Ricoh CL3000e Manual - Page 298

Operating Instructions Administrator Reference 112 B Click the [IEEE 1394], and then type the name into the [Device Name:] box when you change the device name for IEEE 1394 (IP over 1394) interface. • In the [Device Name:] box, type the name of the printer within 13 characters. The factory default name consists of "RNP" and the last 5 bytes of the EUI-64 on the IEEE 1394 (IP over 1394) interface. For example, when the EUI-64 is 00:00:74:00:02:01:0A:66, the factory default name is "RNP0002010A66". No name of 13 characters is permitted if the prefix is "RNP". NetBEUI A Click [NetBEUI]. B Type the name into the [Computer Name] box and comment into the [Comment] box. • In the [Computer Name] box, type the name that helps you to identify printers using the NetBEUI protocol. The factory default name consists of "RNP" and the last 3 bytes of the MAC address on the Network Interface Board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default name is "RNP627DD5". A maximum of 13 characters consisting of uppercase English letters, numeric, or symbols (except and space) can be used. No name is permitted if the prefix is "RNP". You must avoid the duplication of the same name on a network. F Click [Apply]. The setting is transmitted to the printer. G Exit the Web browser.