Ricoh CL3000e Manual - Page 411

Operating Instructions Administrator Reference 225 Message Description and Solutions permission denied. Job cancellation was determined to be unauthorized after checking the user name and host address (except for ROOT authorization). phy release file open failed. Replacing the Network Interface Board is required. Contact your sales or service representatives. Print queue cannot be serviced by printer 0, (In print server mode) The print queue name cannot be serviced. Make sure that print queue volume exists on the specified file server. Print server has no printer. (In print server mode) The printer object is not assigned to the print server . Using NWadmin, assign the printer object, and then restart the printer device. Print session full Cannot accept the print session. Printer has no queue (In print server mode) The print queue is not assigned to the printer. Using NWadmin, assign the print queue to the printer, and then restart it. pserver start. (NetWare) (In print server mode) NetWare service has started. Required computer name () is duplicated name The same computer name is detected on the network. The start job determines the computer name by adding the computer name to the suffix (0,1....). Configure a new computer name that is unique. Required file server () not found Cannot find the required file server. restarted. LPD has started.