Ricoh CL3000e Manual - Page 386

Operating Instructions Administrator Reference 200 Parameter ssid ID value channel frequency channel no. enc [on|off] key [key value] Value to be configured You can set for SSID in infrastructure mode. The characters that can be used are ASCII 0x20-0x7e (32 bytes). A SSID value is set automatically to the nearest access point if the setting has not been made. If the setting has not been made for ad hoc mode, the same value as for infrastructure mode or an "ASSID" value is set automatically if the setting has not been made. You can set the channel. You can specify from following channel. • Metric Version :1-13 • Inch Version :1-11 Set the same channel for all the machines you are using. You can enable or disable the WEP function. To enable the WEP function, specify [on]; to disable it, specify [off]. To start the WEP function, enter the correct WEP key. With a 64-bit WEP, you can use 10 digit hexadecimal. With a 128-bit WEP, you can use 26 digit hexadecimal. To use this function, set the same WEP key for all the ports that transmit to each other.