Ricoh CL3000e Manual - Page 77

Troubleshooting Status Possible Causes, Descriptions, and Solutions An error message on the control Open the front cover of the printer, and then close it. panel stays on after removing the misfed paper. A print image is not clear. Due to a sudden change in temperature, condensation might appear inside the printer, reducing print quality. If this occurs when you move the printer from a cold room to a warmer room, do not use the printer until it acclimatizes to the temperature. The print side of the page is a hazy gray. Adjust the image density. To adjust the image density, press {Menu}, and select Image Density from the "Maintenance" menu. See p.49 "Adjusting the Image Density". If paper is curled, flatten it. Curled or folded paper might cause a hazy gray print. Curl- ing often occurs on envelopes, so be sure to flatten it before 5 printing. A printed image is different When you use some functions, such as enlargement and re- from the image on the compu- duction, the layout of the image might be different from that ter's display. displayed in the computer display. You might have selected to replace True Type fonts with printer fonts in the printing process. To print an image similar to the image on the computer, make the settings to print out True Type fonts as an image. See the printer driver's Help. Note ❒ If the problem cannot be solved, contact your sales or service representative. 68