Ricoh CL3000e Manual - Page 384

Operating Instructions Administrator Reference 198 Parameter route delete {host | net} destination route get {destination} route active {host | net} destination *1 on/off route add default gateway *1 route flush *1 IP address Topics of setting Deletes a host/network route from the table. Host becomes the default setting. Displays only route information corresponding to a specified destination. When the destination is unspecified, all routing information is displayed. You can turn the specified destination on or off. Host becomes the default setting. You can set the default gateway address. Deletes all routing information. SLP Use this command to configure SLP settings. You can search the NetWare server using SLP in the PureIP environment of NetWare 5. Using the slp command, you can configure the value of TTL which can be used by SLP multi-cast-packet. Note ❒ The default value of TTL is "1". A search is executed only within a local segment. If the router does not support multi-cast, the settings are not available even if the TTL value is increased. ❒ The acceptable TTL value is 1 - 255. msh> slp ttl {1 -255}