Ricoh CL3000e Manual - Page 33
Loading Paper in the Bypass, Paper Input, Paper Type, Tray 1, Recycled Paper
UPC - 026649201172
View all Ricoh CL3000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Paper and Other Media Note ❒ When selecting "Plain Paper", select either "Thin" or "Normal" for Loading Paper in the Bypass Tray "PlainPaper Type" in the "Maintenance" menu. A Press the {Menu} key. In addition to plain paper, you can load thick paper, envelopes, glossy paper and OHP transparencies onto 2 "Menu" appears on the panel dis- the Bypass Tray. play. Note B Press the {U} or {T} key to dis- play "Paper Input", and then press the {Enter #} key. ❒ Paper sizes supported by the Bypass Tray can be 90 - 216 mm (3.5 8.5 inches) in width, and 148 - 356 mm (5.8 - 14 inches) in length. Menu: Paper Input C Press the {U} or {T} key to dis- play "Paper Type", and then press the {Enter #} key. Paper Input: Paper Type D Press the {U} or {T} key to dis- play "Tray 1", and then press the {Enter #} key. ❒ The paper size selected with the printer driver overrides the one selected with the control panel. You do not have to make settings with the control panel if you have already made them with the printer driver. However, when using a printer driver other than the RPCS printer driver, you must make the settings using the control panel. For more information about the printer driver, see the printer driver's Help. Also, see p.27 "Specifying a paper type for the Bypass Tray". Paper Type: Tray 1 E Press the {U} or {T} key to dis- play the loaded paper type, and then press the {Enter #} key. ❒ If you load thick paper, or plain or thick paper that has been already printed on one side, make the settings for the paper type with the control panel or the printer driver. See p.26 "Specifying a custom paper size for the Bypass Tray". Tray 1: Recycled Paper In about two seconds, "Menu" appears on the panel display. ❒ The number of pages that can be loaded in the Bypass Tray differs depending on the paper type. F Press the {On Line} key. "Ready" appears on the panel display. 24