Ricoh Priport HQ7000 Network Guide - Page 101
AutoNet, interface_name, scope_ID
![]() |
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Remote Maintenance by telnet ❖ NBT scope ID setting You can configure the NBT scope ID. Limitation ❒ Enter a scope ID using up to 31 alphanumeric characters. msh> wins interface_name scope scope_ID Note ❒ If you receive different scope IDs from DHCP and WINS, the scope ID from DHCP takes priority. Interface name Interface to be configured ether Ethernet interface wlan *1 IEEE 802.11b interface *1 Available when the IEEE 802.11b interface unit is installed. AutoNet Use the "autonet" command to configure AutoNet settings. ❖ Display The following command displays the current AutoNet settings. msh> autonet ❖ Configuration You can configure the AutoNet settings. msh> autonet interface_name [on | off] Note ❒ Select [on] to enable AutoNet. 9 ❒ Select [off] to disable AutoNet. 95
![](/manual_guide/products/ricoh-priport-hq7000-network-guide-b57f17b/101.png)