Ricoh Priport HQ7000 Network Guide - Page 87
Configuration, Changing the Interface, msh> ifconfig, msh> ifconfig ether 192.168.15.16
![]() |
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Remote Maintenance by telnet ❖ Configuration msh> ifconfig interface_name parameter address Interface name ether wlan *2 Interface to be configured Ethernet interface *1 IEEE 802.11b interface *1 If you did not enter an interface name, it will automatically be set to the Ethernet interface. *2 You can specify an interface when installing the IEEE 802.11b interface unit. Parameter Meaning (no parameter) IP address netmask subnet mask broadcast broadcast address ❖ Changing the Interface You can specify either Ethernet interface or IEEE 802.11b interface when using the IEEE 802.11b interface unit. msh> ifconfig interface up The following is a sample configuration, using an IP address of 192.168.15.16 on an Ethernet interface: msh> ifconfig ether 192.168.15.16 The following is a sample configuration, using a subnet mask of 255.255.255.0 on an Ethernet interface: msh> ifconfig ether netmask 255.255.255.0 Note ❒ This affects the configuration of the network interface module on the IP ad- dress used. 9 ❒ The TCP/IP setting is the same as that of the Ethernet interface and IEEE 802.11b interface. ❒ To enter an address using hexadecimal, prefix it with "0x". 81
![](/manual_guide/products/ricoh-priport-hq7000-network-guide-b57f17b/87.png)