Ricoh Priport HQ7000 Network Guide - Page 108
Error Messages on the Display
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Appendix Error Messages on the Display This section describes the most common network-related messages that appear on the display. If a message not described here appears, act according to that message. Reference Before turning the main power off, see "Turning On the Power", Operating Instructions. Message Ethernet Error IEEE802.11b Error Causes Solutions An error has occurred in the Ethernet module. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. IEEE 802.11b card was not inserted when the printer was turned on, or it was pulled out after the printer turned on. An error has occurred in the IEEE 802.11b card. Turn off the main power switch, and check the card is installed correctly. If the message appears again, contact your sales or service representative. 9 102