Home » Ricoh Manuals » Copiers » Ricoh Priport HQ7000 » Manual Viewer

Ricoh Priport HQ7000 Network Guide - Page 99

Changing the host name, msh hostname

View all Ricoh Priport HQ7000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

Remote Maintenance by telnet Parameter rate {auto | 11m | 5.5m | 2m | 1m} Value to be configured You can set the IEEE 802.11b transmission speed. The transmission speed you specify here is the speed at which data is sent. You can receive data at any speed. auto: automatically set (default) 11m: 11 Mbps fixed 5.5m: 5.5 Mbps fixed 2m: 2 Mbps fixed 1m: 1 Mbps fixed Note ❒ When changing the interface to IEEE 802.11b interface, see p.80 "TCP/IP address". ❒ When configuring the IEEE 802.11b interface TCP/IP, see p.80 "TCP/IP address". Changing the host name Use the "hostname" command to change the printer name. msh hostname interface_name printer_name Interface name ether wlan *2 Interface to be configured Ethernet interface *1 IEEE 802.11b interface *1 If you did not enter the interface name, it will be automatically set to the Ethernet interface. *2 Available when the IEEE 802.11b interface unit is installed. 9 Note ❒ Enter the printer name using up to 15 characters. ❒ You cannot use a printer name starting with "RNP" or "rnp". ❒ The Ethernet interface and IEEE 802.11b interface will have the same printer name. 93

Section	Page
Network Guide	1
Introduction	2
Important	2
Software Version Conventions Used in This Manual	2
Trademarks	2
Note:	2
Manuals for This Machine	3
TABLE OF CONTENTS	4
How to Read This Manual	7
Symbols	7
Names of Major Options	8
1. Printer Functions Available over a Network	9
Using the Printer	9
2. Connecting the Network Cable to the Network	11
Confirming the Connection	11
3. Setting Up the Machine on a Network	13
User Tools Menu (System Settings)	13
Interface Settings	14
Network Configuration	15
Configuring the network using the control panel	15
Configuring the network using other utilities	16
Settings You Can Change with User Tools	17
Interface Settings/Network	17
Interface Settings/IEEE 802.11b	19
4. Windows Configuration	21
Configuring TCP/IP	21
Configuring a Windows 95/98/Me Computer	21
Configuring a Windows 2000 Computer	21
Configuring a Windows XP Computer	22
Configuring a Windows Server 2003 Computer	23
Configuring a Windows NT 4.0 Computer	23
Configuring NetBEUI	24
Configuring a Windows 95/98/Me Computer	24
Configuring a Windows 2000 Computer	24
Configuring a Windows NT 4.0 Computer	25
5. Using the Printer Function	27
Printing with Windows	30
Printing with a Windows 2000/XP, Windows Server 2003 or Windows NT 4.0 Print Server	30
Printing without a Print Server	31
Printing with a Mac OS	34
Changing to EtherTalk	34
Configuring the Printer	35
Changing the Printer Name	35
Changing the Zone	35
Printing with NetWare	36
Setting Up as a Print Server	37
NetWare 3.x	37
NetWare 4.x, 5/5.1, 6	38
Using PureIP in the NetWare 5/5.1, 6 environment	40
Setting Up as a Remote Printer	42
NetWare 3.x	42
NetWare 4.x, 5/5.1, 6	44
Setting Up a Client Computer	48
Windows 95/98/Me	48
Windows 2000/XP, Windows Server 2003, Windows NT 4.0	49
6. Using SmartDeviceMonitor for Client	51
SmartDeviceMonitor for Client	51
7. Using SmartDeviceMonitor for Admin	55
SmartDeviceMonitor for Admin	55
Changing the Network Interface Module Configuration	56
Displaying Printer Status	57
Managing User Information	57
Configuring Energy Saver Mode	58
8. Configuring the Network Interface Module Using a Web Image Monitor	59
Going to the Top Page	61
Types of Menu Configuration and Mode	62
Menu Summary	64
Reset Printer Job	64
Status	64
Job	64
Stored File	64
Configuration	64
Verifying the Network Interface Module Settings	65
Configuring the Network Interface Module Settings	66
Using Web Image Monitor Help	67
Downloading Help	67
9. Appendix	69
Printing Files Directly from Windows	69
Setup	69
Using a Host Name Instead of an IP Address	70
When using DNS	70
When setting the IP address of a printer using DHCP	70
In other cases	70
Printing Method	71
lpr	72
rcp	72
ftp	73
Specifying the Device Option	74
Configuring the Device Option	74
Copies	76
Orientation	76
Output Tray	77
Paper Size	78
Collating	79
Input Tray	79
Panel Priority	80
Mode Clear	80
Cycle Setting	81
Ink Saver	81
Print Speed	82
Skip Feed	82
Classify	83
Master Cut	83
Status	84
Remote Maintenance by telnet	85
Using telnet	85
Commands List	86
TCP/IP address	86
Access control	88
DHCP	89
Protocol	90
Printer status	91
Network interface module configuration settings information	91
System log information	91
SNMP	92
IPP	93
Direct printing port	94
Netware	95
SMB	96
ROUTE	96
SLP	97
Setting IEEE 802.11b	97
Changing the host name	99
WINS	100
AutoNet	101
Changing the password	102
DNS	103
Domain name	103
Using DHCP	106
Using AutoNet	106
SNMP	107
Error Messages on the Display	108
Understanding Displayed Information	109
Print Job Information	109
Print Log Information	109
Printer Status and Configuration	110
Printer status	110
Printer configuration	111
Configuring the Network Interface Module	113
Message List	117
System Log Information	117
Precautions	123
Connecting a Dial-Up Router to a Network	123
When using NetWare (file server)	123
When Using Network Utility	124
NetWare Printing	124
Form feed	124
Banner page	125
Printing after resetting the printer	125
When Using IPP with SmartDeviceMonitor for Client	125
Specifications	126