Ricoh Priport HQ7000 Network Guide - Page 97
SLP, Setting IEEE 802.11b, msh> slp ttl {1 - 255}, msh> wiconfig, msh> wiconfig cardinfo
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Remote Maintenance by telnet SLP Use the "slp" command to configure SLP settings. You can search the NetWare server using SLP in the PureIP environment of NetWare5/5.1, 6. Use the "slp" command to configure the value of TTL used by the SLP multi-cast-packet. Note ❒ The default value of TTL is "1". A search is executed only within a local seg- ment. If the router does not support multi-cast, the settings are not available even if the TTL value is increased. ❒ The acceptable TTL value is 1 - 255. msh> slp ttl {1 - 255} Setting IEEE 802.11b Use the "wiconfig" command to configure IEEE 802.11b interface settings. Limitation ❒ You can make settings when installing the IEEE 802.11b interface unit. ❖ View settings The following command displays the current IEEE 802.11b interface settings. msh> wiconfig The following command displays the IEEE 802.11b card information. msh> wiconfig cardinfo Note ❒ If the IEEE 802.11b interface is not working correctly, the IEEE 802.11b card information is not displayed. 9 91