Ricoh Priport HQ7000 Network Guide - Page 71
Printing Method, Start, Programs, MS-DOS Prompt, Accessories, Command Prompt, All Programs
![]() |
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Printing Files Directly from Windows B Add an IP address and a host name to the hosts file in the following format: 192.168.15.16 host # NP "192.168.15.16" is the IP address, "host" is the printer's host name, and "#" to the end are comments. Separate each item with a space or tab, and use only one line. C Save the file. Printing Method The following explains printing using the "lpr", "rcp", and "ftp" commands. Preparation Enter commands using the commands prompt window. The location of the commands prompt in each operating system is as follows: • Windows 95/98 [Start]-[Programs]-[MS-DOS Prompt] • Windows Me [Start]-[Programs]-[Accessories]-[MS-DOS Prompt] • Windows 2000 [Start]-[Programs]-[Accessories]-[Command Prompt] • Windows XP, Windows Server 2003 [Start]-[All Programs]-[Accessories]-[Command Prompt] • Windows NT 4.0 [Start]-[Programs]-[Command Prompt] Note ❒ If the "print requests full" message appears, no more print requests can be ac- cepted. Try printing again when the number of sessions has dropped below 9 the value shown in the following table below. rcp 5 ftp 3 ❒ Enter the file name in a format including the path from the directory executing the commands. 65
![](/manual_guide/products/ricoh-priport-hq7000-network-guide-b57f17b/71.png)