Samsung SL-C480FW User Manual - Page 108
Output bin Full, Check CTD Sensor
View all Samsung SL-C480FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Understanding display messages Message Meaning Suggested solutions Error: [error number] Door open/close The imaging unit is installed improperly, or the cover is not securely latched. Reinstall the imaging unit to confirm it is seated properly. Close the cover until it locks into place. Error: [error number] Turn off then on The machine unit cannot be controlled. Reboot the power and try the printing job again. If the problem persists, please call for service. ID Control Fail There is a problem in the Check CTD Sensor CTD sensor. Reboot the power. If the problem persists, please call for service. Output bin Full Remove paper The output tray is full. Or the sensor is not facing down. Remove papers from the output tray, the machine resumes printing. Or make sure the sensor is facing down. If the problem persists, call for service. Prepare Fuser Soon The life of the fuser unit will Prepare the fuser unit with be expired soon. a new one. Contact the service representatives. Prepare new Imaging unit The life of the imaging unit will be expired soon. Replace the imaging unit with a new one. Contact the service representatives. Message Prepare new Transfer belt Prepare new transfer roller Replace new Fuser unit Replace with new imaging unit Replace newTransfer belt Replace new transfer roller Meaning Suggested solutions The life of the transfer belt will expired soon. Replace the transfer belt with a new one. Contact the service representatives. The life of the transfer belt will expired soon. Replace the transfer belt with a new one. Contact the service representatives. The life of the fuser unit will Replace the fuser unit with be expired. a new one. Contact the service representatives. The life of the imaging unit will be expired. Replace the imaging unit with a new one. Contact the service representatives. The life of the transfer belt has expired. Replace the transfer belt with a new one. Contact the service representatives. The life of the transfer belt has expired. Replace the transfer belt with a new one. Contact the service representatives. 4. Troubleshooting 108