Samsung SL-C480FW User Manual - Page 46

Media and tray Preprinted paper When loading preprinted paper, the printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feeding, turn the paper around. Note that print quality is not guaranteed. 5 Setting the paper size and type After loading paper in the paper tray, set the paper size and type using the control panel buttons. • Must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine's fusing temperature for 0.1 second (about 170°C (338°F)). • Preprinted paper ink must be non-flammable and should not adversely affect machine rollers. • Before you load preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. The paper setting in the machine and driver should match to print without a paper mismatch error. • You change the paper setting set in the machine from Samsung Easy Printer Manager program or SyncThru™ Web Service. - If your machine is connected to the local, you can set the machine's setting from Samsung Easy Printer Manager > Advanced Setting > Device Settings (see "Using Samsung Easy Printer Manager" on page 252). - If your machine is connected to the network, you can set the machine's setting from SyncThru™ Web Service > Settings tab > Machine Settings (see "Using SyncThru™ Web Service" on page 249). • You can set it using System Setup > Paper Setup > select you want Paper Size or Paper Type button on the control panel. 1 Select (Menu) button on the control panel. 2 Press System Setup > Paper Setup > Paper Size or Paper Type. 3 Select the tray and the option you want. 4 Press OK to save the selection. 2. Menu Overview and Basic Setup 46