Samsung SL-C480FW User Manual - Page 29
Installing the driver locally - review
View all Samsung SL-C480FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing the driver locally A locally connected machine is a machine directly attached to your computer using a USB cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine's driver (see "Installing driver over the network" on page 147). • If you are a Mac or Linux operating systems user, refer to the "Installation for Mac" on page 138 or "Installation for Linux" on page 140. • The installation window in this User's Guide may differ depending on the machine and interface in use. • Only use a USB cable no longer than 3 meters (118 inches). 14 Windows 1 Make sure that the machine is connected to your computer and powered on. 2 Insert the supplied software CD into your CD-ROM drive. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing "X" with the letter, which represents your CDROM drive and click OK. • For Windows 8, If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.exe, replacing "X" with the letter that represents your CD-ROM drive and click OK. If "Tap to choose what happens with this disc." pop-up window appears, click the window and select Run Setup.exe. 3 Review and accept the installation agreements in the installation window. Then, click Next. 4 Select USB on the Printer Connection Type screen. Then, click Next. 5 Follow the instructions in the installation window. You can select the software applications in the Select Software to Install window. 1. Introduction 29