Samsung SL-C480FW User Manual - Page 65
Resolution, Receiving a fax, Adjusting the document settings
View all Samsung SL-C480FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Basic faxing 1 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 48). 2 Select (fax) on the control panel. 3 Adjust the resolution and the darkness to suit your fax needs (see "Adjusting the document settings" on page 65). 4 Select (Menu) > Fax Feature > Multi Send on the control panel. 5 Enter the number of the first receiving fax machine and press OK. You can press speed dial numbers or select a group dial number using the (Address book) button. 20 Receiving a fax Your machine is preset Fax mode at the factory. When you receive a fax, the machine answers the call on a specified number of rings and automatically receives the fax. 21 Adjusting the document settings Before starting a fax, change the following settings according to your original's status to get the best quality. 6 Enter the second fax number and press OK. The display asks you to enter another fax number to send the document. It may be necessary to press OK to navigate to lower-level menus for some models. 7 To enter more fax numbers, press OK when Yes appears and repeat steps 5 and 6. Resolution You can add up to 10 destinations. 8 When you have finished entering fax numbers, select No at the Another No.? prompt and press OK. The machine begins sending the fax to the numbers you entered in the order in which you entered them. The default document settings produce good results when using typical textbased originals. However, if you send originals that are of poor quality, or contain photographs, you can adjust the resolution to produce a higher quality fax. 2. Menu Overview and Basic Setup 65