Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 58
Misfeed Removal
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
MISFEED REMOVAL When using the operation panel on the main unit: f For operation from the operation panel with touch panel, see the next page. When a misfeed has occurred, the message shown below will appear and printing will stop. Follow the procedure below to remove misfed paper. PAPER JAM. NOTES q Do not damage or touch the photoconductive drum. (See page 1-6.) q Be careful not to tear the misfed paper during removal. q If paper is accidentally torn during removal, be sure to remove all pieces. CAUTION The fusing unit is hot. Take care in removing paper. Fusing unit General misfeed removal procedure If the INFORMATION key is pressed when a misfeed has occurred, the approximate misfeed locations will be displayed. Use the following procedure to check the misfeed locations and refer to the corresponding misfeed removal procedure. 1 Press the INFORMATION key. 2 Press the or key on the operation panel. Each time the key is pressed, the misfeed removal procedure will be displayed sequentially. The messages in the table below show approximate misfeed locations. For misfeed removal procedure, see the pages indicated in the table. Message SLIDE THE FINISHER FROM MACHINE. PULL OUT TRAY * AND CHECK THE PAPER. PULL OUT PAPER FROM BYPASS TRAY. OPEN THE LOWER LEFT COVER. OPEN THE DUPLEX COVER. OPEN THE LEFT COVER. OPEN THE UPPER PATH. OPEN THE MAIL-BIN COVER. OPEN THE FINISHER TOP COVER. Page 3 Press the INFORMATION key to close the misfeed removal guidance. 4-2