Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 87
Staple sort mode, Punch function only if a punch module, is installed, Saddle stitch function
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
SADDLE STITCH FINISHER I Staple sort mode Collated sets of printouts are stapled and delivered to the offset tray. Alternatively, printed paper is stapled at the center and delivered to the lower tray. The relation among stapling positions, orientation, paper size for stapling, and stapling capacity is shown below. Stapling positions Rear corner of printouts Portrait orientation Available paper sizes: 8-1/2" x 11", A4 and B5 Stapling capacity: Up to 50 sheets for any sizes Landscape orientation Available paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", A3, B4, A4, A4R, and B5 Stapling capacity: Up to 50 sheets for 8-1/2" x 11", A4 and B5, and up to 25 sheets for other sizes Center left two positions of printouts Same as above Same as above Front corner of printouts Same as above Same as above Saddle stitch N/A Available paper sizes: 11" x 17", 8-1/2" x 11"R, A3, B4, and A4R Stapling capacity: Up to xx sheets for any sizes 5 I Saddle stitch function Printed paper is stapled at two positions at the center and is folded in two with the center down before delivery. I Punch function (only if a punch module is installed) If the saddle stitch finisher is equipped with a punch module as a peripheral unit, printed paper can be punched (two holes) and delivered to the offset tray. The saddle stitch function and the punch function cannot be used together. {Original 1} {Punch positions} {Original 2} {Punch positions} 5-19