Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 78

FINISHER Finisher functions I Sort mode Each set will be sequentially printed and delivered. I Group mode All copies of the same page will be grouped. Original Printouts Original Printouts I Offset mode Offset mode Non-offset mode The offset tray moves from side to side so that each set is offset from the previous set and each set can be easily taken out. (The offset function operates only in the offset tray.) When the staple sort function is selected, the offset function will not operate. I Staple sort mode Collated sets of printouts are stapled and delivered to the offset tray. The stapling positions, orientation, paper size for stapling, and stapling capacity are shown below. Stapling positions Rear corner of printouts Center left two positions of printouts Portrait orientation Available paper sizes: 8-1/2" x 11", A4 and B5 Stapling capacity: Up to 30 sheets for any available sizes Same as above Landscape orientation Available paper sizes: 8-1/2" x 11", A4 and B5 Stapling capacity: Up to 30 sheets for any available sizes Two-position stapling cannot be made for landscape orientation. Front corner of printouts Same as above Available paper sizes: 8-1/2" x 11", A4 and B5 Stapling capacity: Up to 30 sheets for any available sizes 5-10