Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 63

Misfeed in the duplex module

Get Sharp AR-M280 PDF manuals and user guides View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

MISFEED REMOVAL Misfeed in the duplex module 1 Pull out the duplex module. Hold the knob and gently open the module. 5 Gently close the duplex module. After closing the duplex module, confirm that the misfeed message is cleared and that the normal display appears. 2 Raise the exit tray and open the cover of the duplex module. If the duplex module is not equipped with an exit tray, the operation concerning the exit tray is not needed (steps 2 to 4). 3 While holding the exit tray up, remove the misfed paper. q If paper is misfed at the upper part of the duplex module: Gently remove the misfed paper taking care not to tear the paper. s Misfeed in the bypass tray 1 Remove the misfed from the bypass tray. Be careful not to tear the misfed paper during removal. 4 2 Open and close the duplex module to clear the misfeed message. q If paper is misfed at the lower part of the duplex module: Gently remove the misfed paper taking care not to tear the paper. 4 Close the cover of the duplex module and return the exit tray. 4-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
4-7
4
Misfeed in the duplex module
1
Pull out the duplex module.
Hold the knob and gently
open the module.
2
Raise the exit tray and open the cover of
the duplex module.
If the duplex module is not
equipped with an exit tray,
the operation concerning
the exit tray is not needed
(steps 2 to 4).
3
While holding the exit tray up, remove the
misfed paper.
●
If paper is misfed at the upper part of the duplex
module:
Gently remove the misfed
paper taking care not to
tear the paper.
●
If paper is misfed at the lower part of the duplex
module:
Gently remove the misfed
paper taking care not to
tear the paper.
4
Close the cover of the duplex module and
return the exit tray.
5
Gently close the duplex module.
After closing the duplex
module, confirm that the
misfeed message is
cleared and that the
normal display appears.
■
Misfeed in the bypass tray
1
Remove the misfed from the bypass tray.
Be careful not to tear the
misfed paper during
removal.
2
Open and close the duplex module to clear
the misfeed message.
MISFEED REMOVAL