Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 85
Saddle Stitch Finisher
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
SADDLE STITCH FINISHER If the saddle stitch finisher is installed, the offset function that stacks each set offset and the saddle stitch function that staples automatically at the center of paper and folds paper in two can be used. Also punching can be performed on printed paper if a punch unit is installed as a peripheral unit. Part names Stapler compiler Paper to be stapled is stacked temporarily. Offset tray The offset function and the stapling function can be used only in this tray. Facsimile output is delivered to this tray. Saddle stitch book tray Paper on which saddle stitch has been made is output here. Top cover Open for misfeed removal. Stapler section Open the front cover and pull out this section to replace the staple cartridge or to remove jammed staples. Front cover Open to replace the staple cartridge or to remove jammed staples. NOTES G Do not put pressure on the saddle stitch finisher (particularly each tray). G Be careful about the offset tray during printing because the tray moves up and down. G Some other peripheral units may be needed for installation of the saddle stitch finisher and some peripheral units cannot be installed together with the saddle stitch finisher. For combination of the peripheral units, see the list of combination of peripheral units on page xxxx. 5 Specifications Name Number of trays Exit system Tray type Paper capacity Paper size Paper weight Paper type Paper limit detection Offset function Paper size for stapling Stapling capacity Saddle stitch finisher 2 Print face down Upper tray: offset tray, Lower tray: saddle stitch book tray Upper tray: 1,000 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2) or 500 sheets (8-1/2" x 14" or B4 size or larger, 20 lbs. or 80 g/m2), Lower tray: Upper tray: max. 11" x 17" or A3, min. 5-1/2" x 8-1/2"R or A5R Lower tray: max. 11" x 17" or A3, min. 8-1/2" x 11"R or A4R Upper tray: 15 to 54 lbs. or 56 to 205 g/m2 Lower tray: 17 to 34 lbs. or 64 to 128 g/m2 Upper tray:same as the specifications of paper for feeding in the main unit Lower tray: Provided in the upper tray only Provided in the upper tray only, offset amount: xx inch (xx mm) Upper tray:11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3, B4, A4, A4R, B5, and B5R Lower tray: 11" x 17", 8-1/2" x 11"R, A3, B4, and A4R 8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m2) 8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m2) *Up to two sheets of 34 lbs. or 128 g/m2 paper can be included as covers. 5-17