Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 86

SADDLE STITCH FINISHER Name Stapling position Reference paper position Power supply Dimensions Weight Saddle stitch finisher Upper tray: two types (one at rear, one at front) Lower tray: 4-47/64" (120 mm) pitch from the center of paper Center Drawn from the power supply unit (peripheral unit)(See page xx.) xx-x/x" (W) x xx-x/x" (D) x xx-x/x" (H) (xxx mm (W) x xxx mm (D) x xxx mm (H)) Approx. xxx lbs. (xx kg) Name Number of punch holes/ hole diameter Hole pitch Punching capacity Punch module 2 holes/x-x/x" or xx mm x-x/x" or xx mm xx sheets Specifications are subject to change for improvement without notice. Supplies For the saddle stitch finisher, the following staple cartridge is needed as supplies. G Staple cartridge (Approximately 2,000 staples x x) xxxx Saddle stitch finisher functions I Sort mode Each set will be sequentially printed and delivered. I Group mode All copies of the same page will be grouped. Original Printouts I Offset mode Offset mode Non-offset mode Original Printouts The offset tray moves from side to side so that each set is offset from the previous set and each set can be easily taken out. (The offset function operates only in the offset tray.) When the staple sort function is selected, the offset function will not operate. 5-18