Sharp AR-M280 AR-M280 AR-M350 AR-M450 Operation Manual (for multifunction - Page 92
Misfeed in the saddle stitch finisher
View all Sharp AR-M280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
SADDLE STITCH FINISHER Misfeed in the saddle stitch finisher If a misfeed has occurred in the saddle stitch finisher during printing, remove the misfed paper following the procedure below. 1Pull the knob and slide the saddle stitch finisher away from the main unit. 6Close the top cover. 2Remove the misfed paper from the main unit. 7Open the front cover. 3If misfed paper is not found in step 1, open the top cover. 8Turn roller rotating knob C until a blue indication is seen (when the stapling function has been used). Roller rotating knob B Blue 4Turn roller rotating knob B until the triangle mark reaches the position indicated in the illustration (only if a punch module is installed as a peripheral unit). 9Remove the misfed paper from the stapler compiler (when the stapling function has been used). Be careful not to tear the misfed paper during removal. Roller rotating knob B 5Remove the misfed paper. Be careful not to tear the misfed paper during removal. 10Open the saddle stitch section cover (when the saddle stitch function has been used). 5-24