Sharp AR-MM9 Service Manual - Page 14
Address directory screen alphabetically ordered
UPC - 074000074828
View all Sharp AR-MM9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
No. Name 1 Message display 2 Memory and reception mode display 3 [SPEAKER] key 4 [REDIAL] key 5 [ADDRESS BOOK] key 6 [SUB ADDRESS] key 7 [ADDRESS REVIEW] key 8 [DIRECT TX MEMORY TX] key 9 [SPECIAL MODES] key 10 Original settings icon display 11 [ORIGINAL] key 12 [RESOLUTION] key 13 [EXPOSURE] key 14 Special function icon display Function, operation Messages appear here to indicate the current status of the machine. When the machine is ready to send, an icon appears to the left. This shows the amount of fax memory that is free and the currently selected reception mode. This key is used for dialing with the speaker. During dialing it changes into the [PAUSE] key, and after pressing the [SUB ADDRESS] key it changes into the [SPACE] key. Touch this key to redial the most recently dialed number. After dialing, this key changes into the [NEXT ADDRESS] key. This displays the Address Directory screen. Touch this key when you want to use an auto-dial number (one-touch dialing or group dialing). Touch this key to enter a sub-address or passcode. When performing a broadcast transmission, touch this key to check your selected destinations. A list of your selected destinations will appear, and destinations can be deleted from the list. Touch this key to switch from memory transmission mode to direct transmission mode. The selected mode is highlighted. Touch this key to select one of the following special functions: Timer transmission, Polling, Slow scan mode, Dual page scan, Program, Memory box, Cover sheet, Adding a message, Special modes When two-sided scanning or job build mode is selected (touch the [ORIGINAL] key to select these functions), an icon will appear in this display. The icon can be touched to open the original settings screen. Touch this key to manually set the original size or select two-sided scanning. Touch this key to change the resolution setting when scanning an original. The selected resolution setting will be highlighted above the key. The initial factory setting is [STANDARD]. Touch this key to change the scanning exposure. The selected exposure is highlighted above the key. The initial factory setting is [AUTO]. When a special function such as polling or dual page scan is selected, the special function icon appears here. B. Address directory screen (alphabetically ordered) If "DEFAULT DISPLAY SETTINGS" is set to address directory, the following screen will be the initial screen that appears when the [FAX] key is pressed. 2 READY TO SEND. SPEAKER REDIAL A B C D 1 E F G H CONDITION 3 SETTINGS SUB ADDRESS ADDRESS REVIEW FREQUENT USE ABCD EFGHI JKLMN OPQRST UVWXYZ ABC GROUP 5 4 No. Name 1 Rapid key display 2 Display switching keys 3 [CONDITION SETTINGS] key 4 [ABC/GROUP] key 5 Index keys Function, operation This shows the rapid keys that have been stored on the selected "index card". The display is initially set to show 8 keys. This can be changed to 6 or 12 using a key operator program. In cases where the rapid keys cannot all be displayed on one screen, this shows how many screens are left. Touch the keys to move through the screens. This displays the condition setting screen, which is used to set various conditions. Touch this key to switch between the alphabetical index and the group index. Destinations programmed in rapid keys are stored in indexes. In the alphabetical index, the destinations appear in alphabetical order. In the group indexes, the destinations appear in the order that they were programmed. Touch the [ABC GROUP] key to switch between indexes. The group indexes can be used as follows: • For storing destinations in groups. • A name can be assigned to each index. • Frequently used destinations can be stored in the FREQUENT USE index. Destinations in the FREQUENT USE index appear in the order that they were programmed. AR-FX7 ADJUSTMENTS 4 - 2