Sharp AR-MM9 Service Manual - Page 25
Operation/procedure, Operation/Procedure, Purpose, Function, Purpose, Function Purpose
UPC - 074000074828
View all Sharp AR-MM9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
66-11 Purpose Operation test/check Function (Purpose) Used to send 300bps signals. (Signal send level: Max.) Section FAX Item Operation Operation/procedure Select the signal number with the 10-key, and press the [START] key. By setting the signal number, the specified signal is delivered to the line at the speed of 300bps. (The signal is continuously sent until the interruption command is provided by pressing the [CUSTOM SETTINGS] key.) The signal send level can be selected from 0dB or the soft SW set value. The signal send level is returned to the soft SW set value before execution of the mode after completion of the mode. By entering the number and pressing the [START] key during execution, the signal kind can be changed. Item 1 NO SIGNAL 2 11111 3 11110 4 00000 5 010101 6 00001 Note: Executable only when the FAX is installed. 1 66-12 Purpose Function (Purpose) Section Item Operation test/check Used to send 300bps signals. (Signal send level: Set by soft SW) FAX Operation Operation/procedure Select the signal number with the 10-key, and press the [START] key. By setting the signal number, the specified signal is delivered to the line at the speed of 300bps. (The signal is continuously sent until the interruption command is provided by pressing the [CUSTOM SETTINGS] key.) The signal send level can be selected from 0dB or the soft SW set value. The signal send level is returned to the soft SW set value before execution of the mode after completion of the mode. By entering the number and pressing the [START] key during execution, the signal kind can be changed. Item 1 NO SIGNAL 2 11111 3 11110 4 00000 5 010101 6 00001 Note: Executable only when the FAX is installed. 1 66-13 Purpose Setting Function (Purpose) Used to register the dial numbers. Section FAX Item Operation Operation/procedure Enter the number with the 10-key, [*] key, and [#] key. Press the [CLEAR] key to return to the initial state. Press the [START] key to register the entered number. Note: Executable only when the FAX is installed. 66-14 Purpose Function (Purpose) Section Item Operation check/test Used to perform the dial test. (10 PPS send test) FAX Operation Operation/Procedure 1. Select the item with the 10-key, and press the [START] key. 2. Set the make time with the 10-key. The dial is sent with the set value + 26ms. The sending dial cannot be interrupted. Item 0 EXECUTE 1 MAKE TIME Content Execution Dial pulse make time setting Setting range - 0-15 Note: Executable only when the FAX is installed. 1 66-15 Purpose Function (Purpose) Section Item Operation check/test Used to perform the dial test. (20 PPS send test) FAX Operation Operation/Procedure 1. Select the item with the 10-key, and press the [START] key. 2. Set the make time with the 10-key. The dial is sent with the set value + 26ms. The sending dial cannot be interrupted. Item 0 EXECUTE 1 MAKE TIME Content Execution Dial pulse make time setting Setting range - 0-15 Note: Executable only when the FAX is installed. AR-FX7 SIMULATION 6 - 9