Sharp AR-MM9 Service Manual - Page 21

Operation/procedure, The adjustments on the machine side must have been normally, completed.,

Get Sharp AR-MM9 - Memory Board - DRAM PDF manuals and user guides
UPC - 074000074828
View all Sharp AR-MM9 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

2 128 128 128 128 50 50-8 The adjustments on the machine side must have been normally completed. Purpose Function (Purpose) Section Adjustment FAX lead edge adjustment (read) FAX Operation/procedure 1. Select "1: COPY START." The currently set value is highlighted beside the item. 2. Enter the correction value with the 10-key, and press the [#/P] key. 3. Press the [START] key. Copying is started. Normal display Error display NOW PRINTING DOOR OPEN JAM PAPER EMPTY There is no tray selection operation. The optimum paper tray for the scanned size is selected. 4. Select the scanning method. Even when the SPF/RSPF is selected, if there is no original on the SPF/RSPF, the OC is scanned. Even when the OC is selected, if there is any original on the SPF/ RSPF, the SPF/RSPF is scanned. (Setting 2) Item Content 1 COPY START Copy start 2 SCAN Scan selection (1: OC, 2: SELECT (OC/ SPF, 3: RSPF back) SPF/RSPF) 3 LEAD Scan lead edge position adjustment value of the selected method in 2. 4 LEFT Scan left edge position adjustment value of the selected method in 2. 5 REAR Scan rear edge position adjustment value of the selected method in 2. 6 RIGHT Scan right edge position adjustment value of the selected method in 2. Setting range Default - - 1-3 1 43-57 50 43-57 50 43-57 50 43-57 50 Note: Executable only when the FAX is installed. 2 50 50 50 50-9 Purpose Adjustment Function (Purpose) FAX lead edge adjustment (print) Section FAX Operation/procedure 1. Select "1: COPY START." The currently set value is highlighted beside the item. 2. Press the [START] key. Copying is started. Normal display Error display NOW PRINTING DOOR OPEN JAM PAPER EMPTY There is no tray selection operation. The optimum paper tray for the scanned size is selected. When two pages are scanned, duplex print is made, Item Content 1 COPY START Copy start 2 LEAD Print lead edge void adjustment value (Front surface) 3 LEFT Print left edge void adjustment value (Front surface) 4 REAR Print rear edge void adjustment value (Front surface) 5 LEAD Print lead edge void (DUPLEX) adjustment value (Back surface) 6 LEFT (DUPLEX) Print left edge void adjustment value (Back surface) 7 REAR Print rear edge void (DUPLEX) adjustment value (Back surface) Setting range - 43-57 Default - 50 43-57 50 43-57 50 43-57 50 43-57 50 43-57 50 Note: Executable only when the FAX is installed. 1 66 66-1 Purpose Setting Function Used to change and check the FAX-related soft SW. (Purpose) Section FAX Operation/procedure 1. Enter the soft SW number to be selected with the 10-key. 2. Check and change the setting content of the selected soft SW. 3. Press the [START] key to save the set content. The FAX-related soft SW is displayed on the LCD, and changing can be made by monitoring it. Note: Executable only when the FAX is installed. AR-FX7 SIMULATION 6 - 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
AR-FX7
SIMULATION
6 - 5
Operation/procedure
1.
Select "1: COPY START."
The currently set value is highlighted beside the item.
2.
Enter the correction value with the 10-key, and press the [#/P] key.
3.
Press the [START] key.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
4.
Select the scanning method.
Even when the SPF/RSPF is selected, if there is no original on the
SPF/RSPF, the OC is scanned.
Even when the OC is selected, if there is any original on the SPF/
RSPF, the SPF/RSPF is scanned. (Setting 2)
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is highlighted beside the item.
2.
Press the [START] key.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex print is made,
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Enter the soft SW number to be selected with the 10-key.
2.
Check and change the setting content of the selected soft SW.
3.
Press the [START] key to save the set content.
The FAX-related soft SW is displayed on the LCD, and changing can
be made by monitoring it.
Note: Executable only when the FAX is installed.
50
50-8
The adjustments on the machine side must have been normally
completed.
Purpose
Adjustment
Function (Purpose)
FAX lead edge adjustment (read)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
SCAN
SELECT (OC/
SPF/RSPF)
Scan selection (1: OC, 2:
SPF, 3: RSPF back)
1-3
1
3
LEAD
Scan lead edge position
adjustment value of the
selected method in 2.
43-57
50
4
LEFT
Scan left edge position
adjustment value of the
selected method in 2.
43-57
50
5
REAR
Scan rear edge position
adjustment value of the
selected method in 2.
43-57
50
6
RIGHT
Scan right edge position
adjustment value of the
selected method in 2.
43-57
50
128
128
128
128
2
50
50
50
2
50-9
Purpose
Adjustment
Function (Purpose)
FAX lead edge adjustment (print)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
LEAD
Print lead edge void
adjustment value (Front
surface)
43-57
50
3
LEFT
Print left edge void
adjustment value (Front
surface)
43-57
50
4
REAR
Print rear edge void
adjustment value (Front
surface)
43-57
50
5
LEAD
(DUPLEX)
Print lead edge void
adjustment value (Back
surface)
43-57
50
6
LEFT (DUPLEX)
Print left edge void
adjustment value (Back
surface)
43-57
50
7
REAR
(DUPLEX)
Print rear edge void
adjustment value (Back
surface)
43-57
50
66
66-1
Purpose
Setting
Function
(Purpose)
Used to change and check the FAX-related soft SW.
Section
FAX
1