Sharp AR-MM9 Service Manual - Page 74
Quick On-line
UPC - 074000074828
View all Sharp AR-MM9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Inside scanned data Direction of transmission Length of scanned data Length of transmitted data The top edge of the scanned image will be cut off by the sender's information; however, when both the sender and the receiver use the same size of paper, the printed fax will neither be reduced nor split up and printed on two pages. 5. Quick On-line When the RSPF is used for memory transmission and there are no previously stored jobs waiting or in progress (and the line is not being used), the machine dials the destination and begins transmitting scanned pages while the remaining pages are scanned. This transmission method is called Quick On-line. The messages "SCANNING ORIGINAL." and "CONNECTING." both appear until scanning of the final page is completed. If the receiving party is busy when a Quick On-line transmission is attempted, the transmission will be automatically reattempted at a later time. NOTE: • The machine is initially set (factory setting) to perform Quick On-line transmission. If desired, you can turn off this function in the key operator programs. • When an original is transmitted using the following methods, the job will be stored in memory (Quick On-line transmission will not be performed): 1) Sending from the document glass 2) Broadcast transmission 3) Timer transmission 4) F-code transmission AR-FX7 KEY OPERATOR PROGRAM 8 - 4